[Free] 2019(Nov) EnsurePass Juniper JN0-102 Dumps with VCE and PDF 311-320

Get Full Version of the Exam
http://www.EnsurePass.com/JN0-102.html

Question No.311

What is the purpose of a network mask?

  1. It is used to identify the maximum hop count of a subnetwork.

  2. It is used to identify an IP address as either private or public.

  3. It is used to identify the network to which an IP address belongs.

  4. It is used to identify the total number of bits present in an IP address.

Correct Answer: C

Question No.312

Exhibit

user@router# run show route /24

inet.0: 142 destinations, 142 routes (141 active, 0 holddown, 1 hidden)

= Active Route, – = Last Active, * = Both

/24 *[OSPF/10] 04:10:20

gt;to 172.25.213.11 via ge-1/0/1.0 to 172.25.213.23 via ge-1/0/2.0

Exhibit

In the exhibit, what does the (gt;) symbol indicate?

  1. There is a software issue with ge-1/0/1.0 interface.

  2. There is a hardware issue with ge-1/0/1.0 interface.

  3. The next hop of 172.25.213.11 is selected.

  4. The next hop of 172.25.213.11 is not resolvable.

Correct Answer: C

Question No.313

Exhibit

user@routergt; show route protocol static

inet.0: 12 destinations, 12 routes (12 active, 0 holddown, 0 hidden)

= Active Route, – = Last Active, * = Both 192.168.1.128/27 *[Static/5] 00:03:13

gt;to 10.20.106.10 via fe-0/0/5.1 192.168.1.144/29 *[Static/5] 00:03:13

gt;to 10.20.14.131 via ge-0/0/0.0 192.168.1.192/27 *[Static/5] 00:03:13

gt;to 10.18.1.1 via ge-0/0/1.0 192.168.1.128/28 *[Static/5] 00:01:06

gt;to 10.20.14.130 via ge-0/0/0.0

Exhibit

Given the routing entries shown in the exhibit, which next-hop IP address will be used for the destination IP address 192.168.1.142? (Assume that only static routes are available for the destination.)

A.

10.20.106.10

B.

10.20.14.131

C.

10.18.1.1

D.

10.20.14.130

Correct Answer: D

Question No.314

Which configuration causes RIP-learned routes to be advertised to other RIP neighbors?

  1. set protocol rip no-passive

  2. top edit policy-options policy-statement demo set term 1 from protocol rip

    set term 1 then accept

    top set protocols rip group internal export demo

  3. set protocols rip advertise in-out

  4. top edit policy-options policy-statement demo set term 1 from active routes

set term 1 then accept

top set protocols rip group internal export demo

Correct Answer: B

Question No.315

What are two reasons why a route might be hidden? (Choose two.)

  1. route preference

  2. routing loop

  3. invalid next hop

  4. routing policy

Correct Answer: CD

Question No.316

What are three examples of dynamic IGPs? (Choose three.)

  1. OSPF

  2. BGP

  3. IS-IS

  4. PIM

  5. RIP

Correct Answer: ACE

Question No.317

Which statement is true about terms in a policy?

  1. A single term can be applied to a protocol or interface, independent of the policy.

  2. Once configured, terms within a policy cannot be reordered.

  3. The name of a term is limited to five characters.

  4. A from statement is optional in a term.

Correct Answer: D

Question No.318

What is a valid multicast MAC address?

A. 00:90:69:9f:ea:46

B. ff:ff:ff:ff:ff:ff

C. 01:00:5e:28:12:95

D. 99:99:99:99:99:99

Correct Answer: C

Question No.319

Which three steps are part of the root password recovery process? (Choose three.)

  1. Reboot the device.

  2. Run the recovery script.

  3. Reset the root password.

  4. Reset the user passwords.

  5. Load factory-default configuration.

Correct Answer: ABC

Question No.320

You have enabled traceoptions to log error messages. You want to have the messages displayed to your terminal session automatically as they occur. Which command should you use in this scenario?

  1. request message terminal

  2. file show

  3. file list

  4. monitor start

Correct Answer: D

Get Full Version of the Exam
JN0-102 Dumps
JN0-102 VCE and PDF

Leave a Reply

Your email address will not be published. Required fields are marked *

Proudly powered by WordPress