[Free] 2019(Nov) EnsurePass Juniper JN0-102 Dumps with VCE and PDF 241-250

Get Full Version of the Exam
http://www.EnsurePass.com/JN0-102.html

Question No.241

Referring to the exhibit, you want to block HTTP access to Web-Server from the subnet where Mal-User is located. All other traffic should be permitted. Which firewall filter configuration do you use?

image

  1. [edit firewall family inet filter STOP-MAL-USER] user@router# show term one {

    from {

    source-address { 200.200.200.0/24;

    }

    destination-address { 100.100.100.10/32;

    }

    protocoltcp; destination-port http;

    }

    then accept;

    }

    term two { then { reject;

    }

    }

  2. [edit firewall family inet filter STOP-MAL-USER] user@router# show term one {

    from {

    source-address { 100.100.100.0/24;

    }

    destination-address { 200.200.200.1/32;

    }

    protocoltcp;

    destination-port http;

    }

    then accept;

    }

    term two { then { reject;

    }

    }

  3. [edit firewall family inet filter STOP-MAL-USER] user@router# show term one {

    from {

    source-address { 100.100.100.0/24;

    }

    destination-address { 200.200.200.1/32;

    }

    protocoltcp; destination-port http;

    }

    then reject;

    }

    term two { then { accept;

    }

    }

  4. [edit firewall family inet filter STOP-MAL-USER] user@router# show term one {

from {

source-address { 200.200.200.0/24;

}

destination-address { 100.100.100.10/32;

}

protocoltcp; destination-port http;

}

then reject;

}

term two { then { accept;

}

}

Correct Answer: D

Question No.242

A network administrator would like to view detailed interface status, properties, statistics, errors, and CoS packet counters. Which operational command will display this information?

  1. show interfaces extensive

  2. show interfaces

  3. show configuration interfaces

  4. show interface status

Correct Answer: A

Question No.243

Which statement is true regarding the Network Time Protocol (NTP) on Junos devices?

  1. MD5 authentication is supported by the Junos OS.

  2. Server mode is not supported by the Junos OS.

  3. The Junos OS can provide a primary time reference.

  4. The Junos OS does not support the use of a boot server.

Correct Answer: A

Question No.244

Which command will display only direct routes?

  1. show route

  2. show route inet.0 direct

  3. show ip route direct

  4. show route protocol direct

    Correct Answer: D

    Question No.245

    Exhibit

    [edit routing-options] user@router# show static {

    defaults { metric 10;

    preference 10;

    }

    route 10.10.10.0/24 { next-hop 192.168.100.1;

    qualified-next-hop 192.168.200.1;

    preference 6;

    }

    metric 8;

    }

    }

    Exhibit

    Given the configuration shown in the exhibit, which statement is correct about traffic matching the route 10.10.10.0/24?

    1. It will be forwarded to 192.168.100.1 using a metric of 10.

    2. It will be forwarded to 192.168.100.1 using a metric of 8.

    3. It will be forwarded to 192.168.200.1 using a metric of 8.

    4. It will be forwarded to 192.168.200.1 using a metric of 10.

Correct Answer: C

Question No.246

What is the default protocol preference for OSPF internal routes?

A.

10

B.

15

C.

150

D.

160

Correct Answer: A

Question No.247

Exhibit

[edit firewall family inet filter COS-CLASSIFIER] user@router# show

term MANAGER { from {

source-address { 192.168.200.0/25;

}

destination-address { 100.100.100.1/32;

}

}

then {

forwarding-class expedited-forwarding; accept;

}

}

term ALL-OTHER-TRAFFIC {

then accept;

}

[edit interfaces ge-0/0/1] user@router# show

unit 0 { familyinet { filter {

input COS-CLASSIFIER;

}

address 192.168.200.1/24;

}

}

Exhibit

Referring to the exhibit, which type of classifier is being used in this CoS configuration?

  1. behavior aggregate

  2. policer

  3. multifield

  4. forwarding policy

Correct Answer: C

Question No.248

When using the monitor traffic command on Junos devices, which UNIX-based utility is accessed?

  1. snoop

  2. tcpdump

  3. monitor

  4. tail

    Correct Answer: B

    Question No.249

    You have a network containing 120 routers. You must establish and maintain connectivity between the loopback interfaces of all routers. Because of the critical services using the network, you need redundancy and fast failover. Which routing protocol should you use in this scenario?

    1. OSPF

    2. RIP

    3. BGP

    4. static

Correct Answer: A

Question No.250

There are three static routes in the routing table that need to be announced to your OSPF peers. Which method is used to accomplish this?

  1. Apply an import policy to OSPF that injects the static routes into OSPF.

  2. Apply an import policy to the static routes that injects the static routes into OSPF.

  3. Apply an export policy to the static routes that injects the static routes into OSPF.

  4. Apply an export policy to OSPF that injects the static routes into OSPF.

Correct Answer: D

Get Full Version of the Exam
JN0-102 Dumps
JN0-102 VCE and PDF

Leave a Reply

Your email address will not be published. Required fields are marked *

Proudly powered by WordPress