[Free] 2019(Nov) EnsurePass IBM C9010-022 Dumps with VCE and PDF 191-200

Get Full Version of the Exam
http://www.EnsurePass.com/C9010-022.html

Question No.191

When attempting to connect to a remote system, a long delay is experienced before the login prompt is displayed. Which of the following is the most likely cause of this issue?

  1. The /etc/resolv.conf file on the remote system is missing.

  2. The /etc/resolv.conf file on the remote system has an invalid entry.

  3. The /etc/hostsfile on the remote system does not have an entry for itself.

  4. The /etc/hosts file on the remote system has an invalid hostname listed for itself.

Correct Answer: B

Question No.192

An administrator wants to migrate data in a volume group from one set of disks to a new set of disks. No free disks are currently available within the volume group. What must be done before migrating the data to the new disks?

  1. The new disks must be added to thevolume group with extendvg and then migrate the data.

  2. The volume group must be imported to the new disks withimportvg.

  3. The volume group must be varied off withvaryoffvgbefore adding the new disks.

  4. The new disks must be formatted for a volume group withchdevand then extended.

Correct Answer: B

Question No.193

Given the NIB configuration shown below, what is the most likely reason that after a link failure for ent0, there was no automatic failover to ent2?

image

  1. Alternate Address is not set

  2. No Internet Address to Ping is specified

  3. Automatically Recover to Main Channel is set to yes

  4. ent0 and ent2 have different media speeds specified

Correct Answer: B

Question No.194

Which of the following is a requirement for EtherChannel using HEA ports?

  1. Dedicated HEA portsare supported as primary adapters when they are configured at different speeds within a single EtherChannel.

  2. HEA logical ports can only be used as a backup adapter when the physical ports are configured as primary adapters in an EtherChannel.

  3. When using HEA logical ports as primary adapters in an EtherChannel, the underlying physical ports must be in an EtherChannel at the switch level.

  4. The #39;Internet Address to Ping#39; attribute must be enabled for logical HEA ports when the EtherChannel only includes primary adapters running at full duplex.

Correct Answer: C

Question No.195

An administrator attempts to install the fileset tivoli.tsm.client, but it fails due to missing requisites.

The administrator copies the required filesets into the install directory and tries the preview install again. It fails with the same results, as shown in the graphic below.

What must the administrator do to successfully install the filesets?

image

  1. Remove the .toe file or run inutoc.

  2. Provide the correct version of xlsmp.rte.

  3. Make the permissions of all of the filesets group executable

  4. Make the permissions of the requisite filesets group readable

Correct Answer: A

Question No.196

With regard to planned maintenance, which statement about interim fix management is correct?

  1. The interim fix must be manually committed prior to applying the updates.

  2. The interim fix will be automatically committed as part of the update process.

  3. If the fileset associated with interim fix will not be updated, it still needs to be temporarily rejected.

  4. If the updates include the official APAR, the update_all process will automatically uninstall the interim fix

Correct Answer: D

Question No.197

The following verification routine is part of a script used to automate cloning rootvg. This routine determines which disks are available for use. Applying the logic, what configuration of disk would be selected by the script as a candidate?

image

  1. A SAN disk virtualized by NPIV.

  2. A local physical SAS drive, currently a member of the vg00 volume group.

  3. A physical SATA disk drive, currently containing the altinst_rootvg volume group.

  4. A SAN disk virtualized as a Virtual SCSI disk, currently not part of a volume group

Correct Answer: D

Question No.198

Based on the following topas output, what is the most cause for concern?

image

  1. I/O Wait

  2. Paging activity

  3. CPU allocation

  4. Storage write latency

Correct Answer: C

Question No.199

Which performance monitoring tool can be used to display processor, VMM, disk I/O, and network data?

  1. topas

  2. vmstat

  3. iostat

  4. lparstat

Correct Answer: C

Question No.200

Which of the following commands will display the current dump device settings?

  1. lscfg-d

  2. lsdump -d

  3. sysdump -v

  4. sysdumpdev-l

Correct Answer: D

Get Full Version of the Exam
C9010-022 Dumps
C9010-022 VCE and PDF

Leave a Reply

Your email address will not be published. Required fields are marked *

Proudly powered by WordPress