[Free] 2019(Nov) EnsurePass IBM C9010-022 Dumps with VCE and PDF 1-10

Get Full Version of the Exam
http://www.EnsurePass.com/C9010-022.html

Question No.1

What is the purpose of the virtual media repository on the VIO Server?

  1. To store resources for use by the NIM server

  2. To store backups of the VIO Server

  3. To store images for use by VIO Clients

  4. To store images for use by VIO Servers

Correct Answer: C

Question No.2

In addition to an available DVD drive and 5GB disk space, what are the minimum server and LPAR requirements to install AIX 7.1 from DVD media?

  1. IBM PowerPC 970, POWER4, POWER5, POWER6 or POWER7 Server 512MB Memory

  2. IBM PowerPC 970, POWER4, POWER5, POWER6 or POWER7 Server 1024MB Memory

  3. IBM POWER4. POWER5. POWER6 or POWER7 Server 512MB Memory

  4. IBM POWER4, POWER5. POWER6 or POWER7 Server 1024MB Memory 3015

Correct Answer: A

Question No.3

Which technology provides the maximum amount of usable storage and resilience for a system with 6 physical volumes?

  1. RAID 0

  2. RAID 1

  3. RAID 5

  4. RAID 6

Correct Answer: C

Question No.4

What infrastructure is necessary to support update installation to an existing IVM instance?

  1. Hardware Management Console

  2. Systems Director Management Console

  3. IBM Systems Director

  4. Network Install Manager

  5. Cluster Systems Manager

Correct Answer: D

Question No.5

An administrator needs to list/query the security attributes for the WPAR syswpar1. Which command will do this?

  1. Issecattr-W syswpar1

  2. Issecconf-w syswpar1

  3. Isattr-s syswpar1

  4. Iswpar-S syswpar1

Correct Answer: D

Question No.6

A system dump has been initiated on an LPAR and LED code quot;0c1quot; is displayed, indicating an I/O error. Where can the administrator find out more about this error?

  1. The HMC Service Guide

  2. The AIX Version 7.1 Commands Reference

  3. HMC Event Log

  4. IBM#39;s Fix Central under Power Systems LED support page

Correct Answer: D

Question No.7

Which configuration will provide an LPAR maximum network resilience and performance with two Ethernet adapters?

  1. Configure both Ethernet adapters as IEEE 802.3ad link Aggregated with src_dst_port mode

  2. Configure EtherChannel using Internet Protocol over InfiniBand (IPoIB) with 64K TCP/IP MTU 64K Superpacket

  3. Configure EtherChannel with one Ethernet adapter as primary adapter amp; one as backup with hash mode roundrobin

  4. Configure both adapters with Quality of Server (QoS) adapters and configure virtual IP address on interfaces

Correct Answer: A

Question No.8

Which command will display the time and date of the last boot?

  1. who-b

  2. last-b

  3. boot-b

  4. time-x

Correct Answer: A

Question No.9

What is the difference between deferred and concurrent firmware updates?

  1. Deferred firmware can be applied concurrently but contains updates that affect the internal program load path, which are not activated until the next time the server is shut down and restarted.

  2. Concurrent firmware must be done on all LPARs in the frame at the same time. Deferred firmware can be loaded on each LPAR at a different time and only becomes active when the LPAR is shutdown and restarted.

  3. Deferred firmware can only be applied during an outage to the managed system as it will automatically shut the managed system down during its installation.

  4. Concurrent firmware is only for minor fixes to the system mircocode while deferred firmware contains major fixes to the service processor.

Correct Answer: A

Question No.10

An administrator wants to create a filesystem with a specific logical volume name, disk location, and disk placement. Which pair of commandswill allow these attributes to be set during filesystem creation?

  1. crfs followed by chvg

  2. crlv followed by mkfs

  3. mkfs followed by chfs

  4. mklv followed by crfs

Correct Answer: D

Get Full Version of the Exam
C9010-022 Dumps
C9010-022 VCE and PDF

Leave a Reply

Your email address will not be published. Required fields are marked *

Proudly powered by WordPress