[Free] 2019(Nov) EnsurePass IASSC ICBB Dumps with VCE and PDF 111-120

Get Full Version of the Exam
http://www.EnsurePass.com/ICBB.html

Question No.111

For Attribute Data, Process Capability is defined as the average proportion of nonconforming products.

  1. True

  2. False

Correct Answer: A

Question No.112

Which statement(s) are correct about the DOE Factorial plot output here? (Note:There are 3 correct answers).

image

  1. Two factors were operated at 3 levels each

  2. The highest tool age was achieved with metal hardness at high level while keeping the cutting speed at the low level

  3. The design indicated above is a 32 factorial design

  4. The cutting speed and cutting angle are at the low level for the least tool age achieved

  5. All factors had 2 levels in the experiment

Correct Answer: BCE

Question No.113

The Lean toolbox includes all of these items except .

  1. Mistake Proofing

  2. Visual Factory

  3. Design of Experiments

  4. Inventory Management

Correct Answer: C

Question No.114

Time is always the metric on the horizontal scale of a(n) Chart.

  1. Pareto

  2. Xbar

  3. Multi-Vari

  4. NP

Correct Answer: C

Question No.115

The calculation of Column Total times Row Total divided by Grand Total yields expected values from what type of chart?

  1. Pareto Chart

  2. Sakami Table

  3. Contingency Table

  4. None

Correct Answer: C

Question No.116

The Japanese born function of a Kanban event utilizes a specific, step-by-step approach meant to bring about major changes to a process.

  1. True

  2. False

Correct Answer: B

Question No.117

In a good Measurement System the most variation will be with part-to-part measurements. What should you do if the majority of variation is associated with the Gage Ramp;R assuming the gage is technically capable?

  1. Focus on fixing the Repeatability and Reproducibility of the measurement device

  2. Purchase a new machine

  3. Focus on trimming the Part-to-Part variation

  4. Run another MSA test with the machine

Correct Answer: A

Question No.118

The class score distribution of schools in a metropolitan area is shown here along with an analysis output. Comment on the statistical significance between the Means of the two distributions. Select the most appropriate statement.

image

  1. The two class Means are statistically different from each other

  2. The two class Means statistically not different from each other

  3. Inadequate information on class Means to make any statistical conclusions

  4. A visual comparison shows that class Means are not statistically different

Correct Answer: A

Question No.119

What aspects of Measurement Systems Analysis (MSA) studies are applicable when the process used to measure does not damage the part?

  1. Destructive variable gage Ramp;R and Crossed Study

  2. Destructive variable gage Ramp;R and Nested Study

  3. Nondestructive variable gage Ramp;R and Crossed Study

  4. Nondestructive variable gage Ramp;R and Nested Study

    Correct Answer: D

    Question No.120

    To be an effective Lean Six Sigma practitioner one must understand the difference between

    .

    1. ANOVA and the Analysis of Variance

    2. Nonparametric tests and tests of Non-normal Data

    3. Practical and Statistical significance

    4. F-test and test of variances of 2 samples

Correct Answer: C

Get Full Version of the Exam
ICBB Dumps
ICBB VCE and PDF

Leave a Reply

Your email address will not be published. Required fields are marked *

Proudly powered by WordPress