[Free] 2019(Nov) EnsurePass Cisco 300-175 Dumps with VCE and PDF 41-50

Get Full Version of the Exam
http://www.EnsurePass.com/300-175.html

Question No.41

Which two prerequisites are required to configure a SAN boot from the iSCSI storage of a Cisco UCS system? (Choose two.)

  1. There must be FCIP connectivity between the Cisco UCS domain and the boot target storage.

  2. There must be IP connectivity between the Cisco UCS domain and the boot target storage.

  3. The operating system to boot must be iBFT-capable.

  4. There must be a group of IP addresses that is associated with the WWN pool.

  5. The operating system to boot must be an iSCSI initiator and must he target-capable.

Correct Answer: BC

Question No.42

You need to configure storage switch-based Fibre Channel zoning in a Cisco UCS system. The zoning must be configured in VSAN 100. What should you do?

  1. Disable zoning on VSAN 100 in Cisco UCS Manager. Configure zoning on the upstream SAN switch on VSAN 100.

  2. Disable zoning on VSAN 100 in Cisco UCS Manager. Set Cisco UCS Manager to interoperability mode. Create VSAN 100 in Cisco UCS Manager. Configure zoning on the upstream third-party SAN switch.

  3. Register the SAN switch manually in Cisco UCS Manager. Enable switch-based zoning on VSAN 100 in Cisco UCS Manager.

  4. Discover the SAN switch in Cisco UCS Manager. Enable inherited zoning on VSAN 100 in Cisco UCS Manager.

Correct Answer: A

Question No.43

Which of the following are true concerning authentication within a Cisco Unified Computing System?

  1. Authentication domains are used to leverage individual authentication systems.

  2. You can create up to 64 authentication domains, each associated with a provider group and realm in Cisco Unified Computing System Manager.

  3. Cisco Unfiled Computing System supports LDAP or RADIUS for remote authentication.

  4. A locally authenticated user account is authenticated directly through the fabric interconnect.

Correct Answer: D

Question No.44

Which consideration must be made while performing backup operations within the Cisco UCS Manager?

  1. Rerunning an existing backup operation overwrites the existing backup file.

  2. Scheduled backups are not available.

  3. A user can perform incremental backups of a system configuration.

  4. Each backup destination can have multiple backup operations.

Correct Answer: A

Question No.45

You need to provision iSCSI initiator IP pools on a Cisco UCS system. How many iSCSI vNICs can you use per boot policy?

A.

2

B.

4

C.

6

D.

8

Correct Answer: A

Question No.46

You configure FCoE in a Cisco UCS system at a customer site. The configuration seems correct, but the customer complains that the system fails to perform as expected. FCoE VLAN discovery, FCF discovery and FLOGI processes work properly. The issue appears to be with the Fibre Channel commands and responses. What is a possible cause of the issue?

  1. The storage device is experiencing configuration or compatibility issues when the FIP process completes successfully.

  2. The routed Layer 3 network between the FCoE SAN and the storage device is experiencing issues when the FIP process fails to complete successfully.

  3. The FCoE configuration is experiencing errors because of issues with the Fibre Channel commends.

  4. The switched Layer 2 network between the FCoE SAN and the storage device is experiencing issues when the FIP process fails to complete successfully.

Correct Answer: D

Question No.47 DRAG DROP

Drag and drop the scripting tools on the left to the correct definitions on the right.

image

Correct Answer:

image

Question No.48

An engineer is performing firmware upgrades through Cisco USC Manager. Which firmware upgrade causes the server to be powered off during the upgrade and powered on after the upgrade is complete?

  1. adapter

  2. board controller

  3. BIOS

  4. storage controller

Correct Answer: B

Question No.49

When a configuration change requires a reboot, which policy specifies how Cisco UCS manager should proceed?

  1. host firmware policy

  2. local disk policy

  3. maintenance policy

  4. boot policy

Correct Answer: C

Question No.50

Which option does UEFI secure boot provide?

  1. checksum verification of the OS

  2. certificate verification of the EFI shell

  3. checksum verification of the EFI shell

  4. certificate verification of the OS

Get Full Version of the Exam
300-175 Dumps
300-175 VCE and PDF

Leave a Reply

Your email address will not be published. Required fields are marked *

Proudly powered by WordPress